| Breakthrough Resin Technology for High Temperature Composite Fabrication by RTM
|
| |
· |
PETI-330 is a new high temperature resin for Resin Transfer Molding |
| |
· |
Significant improvements in both high and low temperature performance compared with traditional materials such as epoxies or bismaleimides. |
| |
· |
Superior combination of processability and mechanical properties compared with existing polyimides such as PMR-15. |
| (Licensed From the NASA Under US Patent 6,359,107) |
|
|
| |
 |
| |
· |
Major advancement in materials technology combining unprecedented processing characteristics with long term (1,000 hours) performance at 300 |
| |
· |
The combination of easy processing for composite fabrication combined with high temperature performance and toughness is unprecedented |
| |
· |
Offers low (<10 Pa-sec, 288) and stable melt viscosity highly suited to RTM process |
| |
· |
Simple and efficient 1 hour full cure process |
| |
· |
High glass transition temperature 330 / 626 |
| |
· |
Solvent free (no volatiles) |
| |
· |
Non toxic |
|
 |
|
|
| |
 |
| |
· |
Superior thermal performance to BMIs |
| |
· |
Specifically designed for Aerospace applications |
| |
· |
Enables cost effective and affordable fabrication of high temperature composite structures for advanced aerospace applications |
| |
· |
Extending the range of possible applications
|
| |
· |
Simplified cure process is highly suitable for mass production requirements |
| |
· |
Reduced fabrication time for components and assemblies |
| |
· |
Reduced mass & weight for high temperature structural applications (i.e. replace metallic parts and assemblies) |
| |
· |
Enables a more cost effective alternative to complex part ssembly |
|
|
| |
Melt Viscosity vs. Temperature Curve of PETI-330
(Stable Viscosity at 280 ) |
| |
· |
Parallel Plate Rheometer conditions: Heating rate 4 /min (Hold at 280 for 2 hr), Frequency : 100 rad/sec. Test specimen size: 2.54 cm diameter x 1.5 mm thickness |
| |
|
 |
Typical Properties:
Viscosity : 1.8 ~ 3.0 Pa·s (280 )
Tg (cured) : 333 |
| - Courtesy of Dr. John W. Connell at NASA LaRC |
|
| |
|
|
|
North American Product Hotline
Stewart Bain M.Eng, P.Eng, MBA
Product Director - Aerospace Materials
Specialty Chemicals and Products
UBE Industries Ltd.
63 Britannia Rord, Ottawa, Ontario, K2B-5W4
Tel:+1(613) 820-6670
Fax:+1(613) 820-0862
e-mail:Stewart.Bain@bcaero.com
|
|
Ube America,Inc.
261 Madison Avenue, 28th Floor
New York, NY 10016
TEL: +1 (212) 551-4721
FAX: +1 (212) 551-4739
URL: http://www.ube.com
|
Ube Europe GmbH
Immermann Hof, Immermannstr,65B
40210 Dusseldorf, Germany
Tel: +49 (0211) 178-8313
Fax: +49 (0211) 361-3297
e-mail: ehrhardt@ube.de
URL: http://www.ube.de/
|
UBE INDUSTRIES, LTD.
Sevans North Bldg.,1-2-1 Shibaura, Minato-ku, Tokyo 105-449,Japan
Tel: +81 (3) 5419-6182
Fax: +81 (3) 5419-6260
e-mail: info@upilex.jp
URL: http://www.ube.co.jp http://www.upilex.jp
|
|
|
